Building or Renovating? The Level 2 Work You'll Need

Before you start

Almost every new home, knockdown rebuild and major renovation needs Level 2 work at three stages. Planning it early avoids delays at handover.

Stage 1: Disconnection

Before demolition, the existing service is disconnected and made safe. For renovations, the service may need to be relocated or temporarily disconnected while work happens near it.

Stage 2: Builders supply

A temporary builders supply on a pole or pillar gives trades power during construction. See temporary builders supply.

Stage 3: Permanent connection

Near completion, the permanent service and metering are installed, the network is notified and the home is connected. For duplexes and granny flats, each dwelling may need its own connection and meter. See granny flat and duplex connections.

Timing tips

• Lodge connection applications early, as network approval can take time
• Book metering well before handover
• Make sure the meter box position suits the service route

Frequently asked questions

Who arranges the meter?

The customer's electricity retailer arranges the meter through its metering provider. We coordinate the Level 2 side so it's ready.

Can one Level 2 electrician handle all three stages?

Yes, and it's simpler. We manage the disconnection, builders supply and permanent connection.